- ページ 5
バッテリーチャージャー amberroot 0B2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。amberroot 0B2 17 ページ。 Solar mppt charger for upgrading inverters
ページを印刷する
Table 2 See Error! Reference source not found. in page Error! Bookmark not defined.
Wiring must be done by a professional qualified for such installations. Take extra care
while connecting High voltage systems, Battery terminals.
Take care to not connect the panels to the battery input or the connection of the batteries
to the PV input.
TAKE CARE not to connect the AC line to any of the DC (PV or Battery) connections.
REhub is intended to be connected exclusively to Solar Photovoltaic source. It is suitable
for charging any type of lead-acid batteries.
REhub is electronically protected against overloads, PV short-circuits, overheating, polarity
reversal of the battery, polarity reversal of the PV.
Figure 2 : L Plate to access Cable compartment
4.1 Components of the Cable Compartment
Table 3 ; See Error! Reference source not found. ( in the last page)
S/no
Description
1
Terminal to connect Solar -Ve
2A &
Terminals to connect Battery +Ve and
2B
Solar +Ve.
3
Terminal to connect to Inverter's Battery
-Ve
4
Terminal to connect Battery -Ve
5
External Temperature Sensor
6
3 PIN,15 A Plug to connect AC input
from Mains
5
Remove this L Plate to
access cable
compartment
Access
the
removing the L Plate.
Cable entry is through the slot in the L Plate.
Close the L Plate after the terminals are
sufficiently tightened and all the connections
are checked for correctness.
Comment
Ensure appropriate cable size is used and ends
properly crimped to avoid accidental shorts
from stray strands.
Ensure that the input Voltage and Current
(String sizing) do not exceed name plate
ratings.
Disconnect the connection between the Inverter
and Battery -Ve terminal, at the Battery -Ve
terminal, and connect to terminal #3
Connect the External temperature Sensor (Part
to be purchased from Amberroot) for
temperature compensation of Battery charging
(Optional)
Connect this plug to Mains replacing the
existing Inverter connection
Ver 7.0
cable
compartment
User Manual
after