- ページ 9
食器洗い機 Asko D3530のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Asko D3530 16 ページ。 User manual use & care guide fr
Asko D3530 にも： クイック・スタート・マニュアル (2 ページ), (スペイン語) 操作とケア (16 ページ), (フランス語) 使用マニュアル (16 ページ)
ページを印刷する
Model D3530 has several special settings available, as
defined below. To access them, press the Menu button
until "Special Settings" displays then press Set.
You can change the language in the display window to
one of the following:
English
French
Spanish
Russian
Italian
To change the language, follow the steps below:
1. Press Menu until "Special Settings" displays then
press Set.
2. Press Menu again until "Language" displays.
3. Press Set until your language choice displays.
4. Press Menu to confirm your selection.
At the end of each program, a buzzer sounds. You can
adjust the volume of the buzzer as follows:
1. Press Menu until "Special Settings" displays then
press Set.
2. Press Menu again until "Buzzer" displays.
3. Press Set until your volume preference displays. Your
choices are 1 (softest) to 9 (loudest). A "0" indicates
the buzzer is off.
4. Press Menu to confirm your selection.
You can change the temperature on the display window
from Celsius to Fahrenheit and vice versa. To do this,
follow the steps below:
1. Press Menu until "Special Settings" displays then
press Set.
2. Press Menu again until "°C" or "°F" displays.
3. Press Set until your preference displays.
4. Press Menu to confirm your selection.
Swedish
Danish
Norwegian
Netherlands
Finnish
This model can be programmed not to start unless the
Start button is held down for three seconds.
To set the child lock feature, follow the steps below:
1. Press Menu until "Special Settings" displays then
press Set.
2. Press Menu again until Child Lock displays.
3. Press Set to turn the feature on.
3. Press Menu to confirm you change.
A key symbol appears in the display when the child lock
is active. To deactivate the child lock, press the Set and
Menu buttons simultaneously. You can then select the
program and options and press Start to start the unit.
The child lock comes back on automatically after three
minutes.
To permanently deactivate the lock, repeat the above
steps.
You can view how much water the machine used the
last time it was operated and how many times it has
been used since it was new. To do this, follow the steps
below.
1. Press Menu until "Special Settings" displays then
press Set.
2. Press Menu again until "Machine Information"
displays.
3. Press Set to view the water usage (in litres).
4. Press Set again to view the number of times the
machine has been used.
4. Press Menu to exit.
You can easily restore the factory default settings (except
language) by following the steps below:
1. Turn off the power. Wait approximately 5 seconds.
2. Hold in the Program button while pressing the main
power button.
Page 9