- ページ 6

室内暖炉 ambiance OUTLANDER 19のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ambiance OUTLANDER 19 7 ページ。

MODEL: OUTLANDER 19

Optional Ash Pan Kit (For units with pedestal)

Provision have been made on the appliance to install an optional ash drawer kit.

note:

It is recommended to install the rails on the pedestal base prior to instal-

ling pedestal assembly to the firebox.

1. If the appliance has been previously operated, it must be cold and the ashes

must be removed in order to access the ash plug.

2. If the pedestal has been installed with the opening to the back, it will be ne-

cessary to lay the appliance into its back, remove the pedestal and re-install

it with the opening to the front. It is recommended all fire brick, including

baffles, be removed prior to placing the appliance on its back.

3. From the underside of the appliance, remove the nuts that secure the ash

opening cover plate.

4. Install the ash pan rails using the screws provided.

5. Snap the magnets into place.

6. Slide the ash drawer into the ash housing.

7. Install the handle using the screws provided and affix the logo to the ash pan housing cover as illustrated.

8. Place the ash pan housing cover in front of the opening, engaging it into the slots.

9. Remove the small light weight brick that was covering the ash opening and discard. It is important that the area around the

ash opening be cleaned well to ensure that a proper seal is created between the new ash plug and the ash opening.

10. Once the area surrounding the opening has been cleaned, place the new ash plug (supplied) over the opening, allowing the

protrusion on the brick to recess into the opening on the bottom of the firebox.

The kit allows for convenient removal of excess ash.

Ambiance® Fireplaces & Grills

EP20PAD

LOGO

PLACEMENT

www.ambiancefireplaces.com

OUTLANDER

WOOD COLLECTION

ASH OPENING

COVER PLATE