- ページ 7
スピーカー d&b audiotechnik XSLi12のPDF マニュアルをオンラインで閲覧またはダウンロードできます。d&b audiotechnik XSLi12 13 ページ。
ページを印刷するConnector wiring (NLT4 F/M | Phoenix option)
d&b XSLi8/XSLi12 Manual 1.1 en
Rigging components and arrays
The cabinets are mechanically connected using the rigging strands
on both sides of the cabinet front and a central strand at the rear
of the cabinet. All necessary rigging components are mounted on
the cabinet and fold out or slide out when needed.
A detailed description of the rigging components is given in the
respective rigging manuals.
2.2 Connections
The cabinets are fitted with NLT4 F/M connectors. All four pins of
both connectors are wired in parallel using the following pin
assignment:
▪ Pins 1+/1– feeding the forward LF drivers.
▪ Pins 2+/2– are connected to the passive crossover networks
feeding the side firing LF drivers and the MF/HF driver sections.
Phoenix option
NOTICE!
Risk of damage to the system components!
Different pin assignment on the loudspeaker and amplifier.
Þ Please refer to the corresponding amplifier manual.
Cabinets with the Phoenix option are fitted with a 4-pole Phoenix
connector socket (type: DFK PC 4/4 GF) using the following pin
assignment:
▪ Pins 1+/2– feeding the forward LF drivers.
▪ Pins 3+/4– are connected to the passive crossover networks
feeding the side firing LF drivers and the MF/HF driver sections.
d&b LoadMatch
With the d&b four channel amplifier platform, the LoadMatch
function enables the amplifier to electrically compensate for the
properties of the loudspeaker cable used without the need for an
additional sense wire. For applicable loudspeakers, LoadMatch is
therefore independent of the connector type used.
2.3 Operation
Amplifier output mode(s): 2-Way Active
Application
Setup
XSLi8
XSL8 Line
XSL8 Arc
XSL8 AP
XSLi12
XSL12 Line
XSL12 Arc
XSL12 AP
Cabinets per
pair of amplifier
channels
2
2
1
2
2
1
7