- ページ 5

スピーカー d&b audiotechnik Z0820のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。d&b audiotechnik Z0820 12 ページ。

2. M6 loudspeaker

M6 loudspeaker

NLT4 F/M connector wiring

d&b M6 Manual 1.1 en

The M6 is a high performance stage monitor employing an

integrated"12/1.3" exit coaxial driver design with neodymium

magnet and constant directivity horn loading. Its dispersion of 50°

x 80° (hor. x vert.) provides an accurately defined coverage area

on stage. Used upright the M6 serves as a powerful front PA

speaker (80° x 50°) for various applications.

The M6 is a two-way design with a built-in passive crossover

network. It can optionally be operated in two-way active mode just

by changing the configuration of the applicable amplifier without

any modifications to the loudspeaker. Its frequency response

extends from 65 Hz to above 17 kHz.

The cabinet is constructed from marine plywood and has an impact

resistant paint finish. The front of the loudspeaker cabinet is

protected by a rigid metal grill in front of an acoustically

transparent foam. Each side panel incorporates a handle while

four M10 threaded inserts allow connection to different rigging

devices and brackets. A pole mount is incorporated in one side

panel to accept a loudspeaker stand. Two runners recessed in the

bottom panel prevent cabinet movement and protect the bottom

panel against scratching.

The cabinet is fitted with NLT4 F/M connectors. All four pins of

both connectors are wired in parallel using the pin assignments

1+/1– (LF) and 2+/2– (HF). Using one connector as the input, the

second connector allows for direct connection to a second cabinet.

The cabinet can be supplied with NL4 M or EP5 connectors as an

option.

LF +

NLT4 F/M

NL4 M

EP5

LF –

HF +

HF –

1–

2–

n.c.