- ページ 7

アダプター d&b audiotechnik Z5385のPDF リギング・マニュアルをオンラインで閲覧またはダウンロードできます。d&b audiotechnik Z5385 12 ページ。

d&b Z5385 Rigging manual 1.4 en

2. Attach the Flying adapter

1. Attach the Flying adapter on top of the cabinet until the Front

links of the cabinet fit into the slots at the front of the adapter.

2. Insert and lock the second Locking pins of the cabinet's Front

links on both sides.

3. On the rear align the Flying adapter with the [0°] hole of the

rear rigging strand.

4. Insert and lock one Locking pin in the [0°] hole.

Note: The second Locking pin is not needed and can be

stored in one of the remaining holes.

3. Prepare the next cabinet

1. Prepare the Front and Splay links of the next cabinet.

4. Preset the splay angle

The splay angles between adjacent cabinets are set at the central

rear rigging strands of the cabinets and can be set in the range

from 0° to 14° in 1° steps.

Þ Preselect the splay angle according to your ArrayCalc

simulation and insert and lock one Locking pin in the

appropriate hole.