- ページ 4

フラッドライト ACR Electronics RCL-100のPDF 製品サポートマニュアルをオンラインで閲覧またはダウンロードできます。ACR Electronics RCL-100 20 ページ。 Remote controlled search light
ACR Electronics RCL-100 にも：トラブルシューティングと部品交換マニュアル (17 ページ)

ページを印刷する

2.0

GENERAL

The RCL-100D was specially designed for mariners who require a high intensity remote

controlled searchlight that can stand up to the tough marine environment.

The RCL-100D Searchlight System contains a narrow beam searchlight that produces 200,000

peak candle power by combining two 55W halogen lamps with our unique optical quality

parabolic reflectors.

All functions of the Searchlight can be electrically operated by remote control from the pilot

area of the vessel using the URP-102 Point Pad™, URC-102 Master Controller, and

interconnect cable supplied with the RCL-100D. Searchlights equipped with the URC-102

Master Controller now have ACR's unique XRCiZ feature. The XRCiZ feature routinely

operates all moving parts in the Searchlight to keep the motors and drive mechanism freely

running.

3.0

SEARCHLIGHT

The sleek design and modern construction of the Searchlight body makes it attractive for

recreational and commercial vessels. The Searchlight is totally enclosed and is made of rugged

aluminum alloy. It is gasketed and finished to be resistant to the weather.

Mounting

Make sure the area is clean and dry. The Searchlight can be mounted where desired, using

appropriate length 3/16" diameter, stainless steel fasteners. Four (4) nylon shoulder washers are

supplied with the RCL-100D Searchlight. The nylon washers prevent a galvanic reaction

between the mounting hardware and the base of the Searchlight. Be sure these washers have

been inserted in the base mounting holes and that the mounting base gasket is securely in place

before bolting down. Silicone grease should be applied to the bottom of the gasket to help in

waterproofing the unit. When mounting, be sure that the Searchlight is able to rotate 360°

without hitting any obstructions. For the drilling hole pattern, refer to the Searchlight Mounting

Template, supplied in the Mounting Templates.

CAUTION: Do not mount the searchlight upside down. Moisture will not be able to

drain from the inverted light head assembly.

NOTE: The Searchlight should be left uncovered if the XRCiZ feature is enabled.

4.0

REMOTE CONTROL SYSTEM

The Remote Control System consists of the URC-102 Master Controller and the URP-102

Point Pad™. This system is compatible with 12 VDC and 24 VDC systems without

modification. The Remote Control System may be used with 12 V or 24 V Searchlights, ONLY

THE LAMPS IN THE LIGHT HEAD ASSEMBLY MUST BE CHANGED TO MATCH

THE VOLTAGE RATING.

Y1-03-0138 Rev. K