- ページ 8

温度計 Ambient Weather TX-3107のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ambient Weather TX-3107 10 ページ。 7-channel floating pool and spa thermometer

not observe Daylight Savings Time.

3. Please visit

AmbientWeather.net/help

Problem

Wireless remote (floating thermometer)

not reporting in to console.

There are dashes (--.-) on the display

console.

Pool float does not power up.

LCD display fading or unreadable.

Moisture appears in LCD Screen

Version 1.0

for assistance.

Solution

The maximum line of sight communication range is 150'

line of sight and 100' under most conditions. Move the

console closer to the sensor.

If the sensor is too close (less than 5'), move the sensor

assembly away from the display console.

Make sure the wireless sensor LCD display is working..

Install a fresh set of batteries in the remote thermometer.

For cold water environments, install lithium batteries.

Make sure the remote sensors are not transmitting

through solid metal (acts as an RF shield), or earth

barrier (down a hill).

Move the display console around electrical noise

generating devices, such as computers, TVs and other

wireless transmitters or receivers.

Use the tether to fix the sensor as close as possible to the

console without transmitting through Earth or ground.

If the pool sensor display does not power up after

inserting the batteries, press the reset button.

Replace batteries in the floating thermometer.

Extreme heat or cold will cause the display to fade but

does not affect the wireless functionality. Bring into

house to restore display.

Remove from the water, open the lid and allow the

sensor cavity to dry out.

Page 8