- ページ 13

温度計 Ambient Weather WS-08のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ambient Weather WS-08 16 ページ。 Ambient weather wireless indoor/outdoor 8-channel thermo-hygrometer with daily min/max display

ページを印刷する

1. Email Support:

2. Live Chat Support:

(M-F 8am to 4pm Arizona Time)

3.Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)

Problem

Wireless remote

(thermo-hygrometer)

not reporting in to

console.

There are dashes (--.-)

on the display console.

Temperature sensor

reads too high in the

day time.

Version 1.0

[email protected]

www.ambientweather.com/chat.html

If any of the sensor communication is lost, dashes (--.-)

will be displayed on the screen. To reacquire the signal,

press and hold the CHANNEL/+ button for 3 seconds,

and the remote search icon

displayed. Once the signal is reacquired, the remote

search icon

displayed.

The maximum line of sight communication range is 300'

and 100' under most conditions. Move the sensor

assembly closer to the display console.

If the sensor assembly is too close (less than 5'), move

the sensor assembly away from the display console.

Make sure the remote sensor LCD display is working

and the transmitter light is flashing once per 60 seconds.

Install a fresh set of batteries in the remote thermo-

hygrometer. For cold weather environments, install

lithium batteries.

Make sure the remote sensors are not transmitting

through solid metal (acts as an RF shield), or earth

barrier (down a hill).

Move the display console around electrical noise

generating devices, such as computers, TVs and other

wireless transmitters or receivers.

Move the remote sensor to a higher location. Move the

remote sensor to a closer location.

Make sure the thermo-hygrometer is mounted in a shaded

area on the north facing wall. Consider the following radiation

shield if this is not possible:

http://www.ambientweather.com/amwesrpatean.html

Solution

will be constantly

will turn off, and the current values will be

Page 13