- ページ 5

計測機器 Ambient Weather WS-2063のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ambient Weather WS-2063 6 ページ。 Indoor temperature and humidity monitor with backlight

5. Troubleshooting Guide

If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Technical Support: 480-346-3380 (M-F 8am to 4pm Arizona Time)
Problem
Humidity is inaccurate
Temperature is
inaccurate
Display is dim
Monitor locks up or
exhibits unusual
operation

6. Liability Disclaimer

Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the "User manual" is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
This product is designed for use in the home only as indication of weather conditions. This product is
not to be used for medical purposes or for public information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Solution
Humidity is a difficult parameter to measure electronically and drifts over
time due to contamination. Even the most expensive hygrometers are only
accurate to ± 3% of full scale.
In addition, location has an adverse effect on humidity readings. Note that
indoor and outdoor humidity varies greatly indoors, outdoors and location to
location, so you cannot accurately compare your humidity to official
weather station sources, such as the news or National Weather Service.
Use a calibrated source, such as a sling psychrometer for comparison.
Temperature errors can occur when a sensor is placed too close to a heat
source. To verify temperature accuracy, we recommend a mercury or red
spirit (fluid) thermometer. Bi-metal (dial thermometers
or thermostats) and other digital thermometers are not a good source and
have their own margin of error.
Replace the batteries.
Press the reset button.
Page 5