- ページ 12

計測機器 Ambient Weather WS-25のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ambient Weather WS-25 19 ページ。 Wireless 8-channel floating pool and spa thermometer with indoor temperature and humidity

ページを印刷する
Ambient Weather WS-25 ユーザーマニュアル
3.3

Alarms

Note: High and low temperature alarms can be set for the Channel 1 sensor only.

3.3.1 Viewing the Alarms

Press the SET button to view the High (MAX) and LOW (MIN) alarm along with the alarm time.
Press the SET button again to return to the normal mode.

3.3.2 Default Alarms

Channel Default Condition HI ALARM (temperature) ºF
1
OFF

3.3.3 Setting the Alarms

3
In normal mode, press the SET button once, and the alarm time and icon ALM will appear.
4
Alarm Hour: Press and hold the SET button for 3 seconds, and the alarm hour will flash. Press
the [+] button to increase the alarm hour and the [-] button to decrease the alarm hour. Press and
hold the + or - button to change rapidly.
5
Alarm Minutes: Press the SET key again (do not hold) and the alarm minutes and flash. Press
the [+] button to increase or the alarm minute and the [-] button to decrease the alarm minute.
Press and hold the + or - button to change rapidly.
While the alarm hour or minutes is flashing, press and hold the SET button for three seconds to
toggle the alarm on and off. The alarm icon will appear when active and disappear when inactive.
6
Low Temperature Alarm: Press the SET key again and the low temperature alarm will flash.
Press the [+] button to increase the low temperature alarm and the [-] button to decrease the low
temperature alarm. Press and hold the + or - button to change rapidly.
While the low temperature alarm is flashing, press and hold the SET button for three seconds to
toggle the alarm on and off. The alarm icon will appear when active and disappear when inactive.
7
High Temperature Alarm: Press the SET key again and the high temperature alarm will flash.
Press the [+] button to increase the high temperature alarm and the [-] button to decrease the high
temperature alarm. Press and hold the + or - button to change rapidly.
While the high temperature alarm is flashing, press and hold the SET button for three seconds to
toggle the alarm on and off. The alarm icon will appear when active and disappear when inactive.
8
Press the SET button to confirm the change. Press the SET button again exit the alarm set mode.

3.3.4 Silencing an Alarm

If the high or low temperature alarms are exceeded, the alarm will sound and the alarm icon will flash.
To silence the alarm, press any button. The alarm icon will continue to flash until the alarm is no
longer active.

3.4 Min/Max Mode

In normal mode, Press the MIN/MAX button once to view the MAX values.
Version 1.2
©Copyright 2019, Ambient LLC. All Rights Reserved.
100
LOW ALARM (temperature) ºF
60
Page 12