- ページ 4

クロックラジオ Ambient Weather RC-6050 ClearViewのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ambient Weather RC-6050 ClearView 13 ページ。 Clearview am/fm radio controlled projection alarm clock with indoor temperature

ページを印刷する
3
Sleep Button. When the radio is turned on:
Press to display sleep time and SLEEP
icon, press the sleep button repeatedly to
change the sleep time between 15, 30 and
60 minutes.
4
Projector
5
LCD (display)
6
AM/FM Button. When the radio in turned
on:
Press to switch between AM and FM.
7
Radio Preset Buttons [1], [2], [3], [4], [5].
When the radio in turned on:
Press to tune to preset station.
Press and hold for 2 seconds to preset the
current station.
8
CH+ Toggle Switch. When the radio in
turned on:
Toggle CH+ to increase the radio
frequency.
Toggle and hold CH+ for 1 second to scan.
During scanning, Toggle CH+ to stop
scanning.
9
CH- Toggle Switch. When the radio in
turned on:
Toggle CH- to decrease the radio frequency.
Toggle and hold CH- for 1 second to scan.
During scanning, Toggle CH- to stop
scanning.
10
VOL+ Toggle Switch. When the radio in
turned on :
Toggle VOL+ to increase the radio volume.
11
VOL- Toggle Switch. When the radio in
turned on:
Toggle VOL- to decrease the radio volume.
12
ALARM ON/OFF/ALARM RADIO Slide
Switch.
Slide to ON position to turn on alarm
function. The alarm time displays for 5
seconds. Alarm will beep at the displayed
alarm time.
Slide to OFF position to turn off the alarm.
Slide to RADIO position to turn on alarm
function. The alarm time displays for 5
seconds. Radio will sound at the displayed
alarm time.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
17
UP Button.
In the time and date or alarm set mode,
press to adjust the value of the flashing digit
upwards. Press and hold to change rapidly.
18
Reset Button.
If the radio stops functioning, press the
reset button.
19
ROTATE Button.
Press to rotate the projection 180 degrees.
20
BACKLIGHT ON/OFF Slide Switch.
Reference Section 5.6.1 for detailed
operation.
21
L/H slide switch. Set backlight brightness.
Slide to L position to dim the backlight.
Slide to H position for brighten the
backlight.
22
PROJECTION ON/OFF Slide Switch.
Reference Section 5.6.1 for detailed
operation.
23
RCC Button:
In normal mode, press to manually turn on
or turn off the RC reception.
During the RC reception mode, press and
hold for 8 seconds to turn off the RC auto
reception function. Press and hold it for 8
seconds again to turn on RC auto reception
function.
24
FOCUS Knob. Adjust the quality of the
projected data.
25
DC jack for AC adapter
26
Battery compartment
Page 4