- ページ 7

キッチン家電 Asko D1996FIのPDF プランニング・デザイン・マニュアルをオンラインで閲覧またはダウンロードできます。Asko D1996FI 15 ページ。 User manual use & care guide general fr (french version)
Asko D1996FI にも：取扱説明書 (12 ページ), インストールとカスタマイズ (4 ページ), プランニング・デザイン・マニュアル (19 ページ), 取扱説明書 (12 ページ), 取付説明書 (14 ページ), (スペイン語) 操作とケア (12 ページ), (フランス語) 使用と保守のマニュアル (12 ページ)

ページを印刷する

MODEL D1796FI AND D1996FI

UNIT DIMENSIONS

Height

32-1/4"– 35-1/2"

Width

23-1/2"

Depth

23-7/16"

Depth w/door open

46-1/2"– 48-1/4"*

Weight

104 lb

23-1/2"

603 mm

CUSTOM FRONT PANELS

The D1796FI and D1996FI can only be

installed with a fully-integrated custom

door panel that extends from the toe kick to

the counter top. A one-piece custom door

panel with a curved handle is available for

4-inch toe kick installations (see page 12).

Refer to page 8 for instructions on how to

install the custom panels.

CUTOUT DIMENSIONS

Height

32-1/4"–35-1/2"

Width

23-3/4"

Depth

23-7/16"

*For fully-integrated installations, the

dishwasher's total depth with the door open

can vary depending on the height of the toe

kick. The total depth for a 4" toe kick is

48-1/4", a 6" toe kick is 46-1/2". This

depth varies from the standard 46-1/2"

because in a 4" toe kick installation the

Specifications are subject to change without notice. See installation instructions for additional details.

Metric

819–902 mm

597 mm

596 mm

1181–1226 mm

48 kg

door panel is typically extended 1-3/4"

beyond the door (control panel) and this

lengthens the door. See page 9 for details.

NOTE:

Maintain a 1/8" (3 mm) minimum

clearance between unit and cabinet.

50mm

Metric

6-1/4" to 8-1/4"

159-210 mm

819–902 mm

603 mm

596 mm

The electrical and water supplies should

enter through the area indicated by the

shaded area. Preferably, they should come

through the right side of the machine. The

access hole must be round and smooth

and no bigger than 2" in diameter.

ASKO D

TECHNICAL DATA

Electricity

Water pressure

Heating element

Max loading

46-1/2" - 48-1/4"*

1181 - 1226 mm

EASYINSTALL SYSTEM

Every ASKO dishwasher comes with the

unique EasyInstall System that speeds the

installation and reduces problems. This

system has these components which are

approved by regulatory authorities (cUL):

• Over 5' of Pex hose that replaces the

• Over 6' of drainhose with an adaptable

23-3/4"

603 mm

• A 6' long electrical cord with standard,

ISHWASHER

120V, 60Hz, 15 amp

18-176 psi

1400 watt

1600 watt

water-inlet copper tubing. It has a 3/8"-

compression fitting that mates with the

shut-off valve.

drain connection.The high loop is built

into this hose on the back of the unit. If

this loop is removed to lengthen the

hose, another high-loop must be built

into the installation somewhere along

the line (typically where the hose passes

through the cabinet).

3-pronged, 110V plug. This eliminates

the need to wire anything under the unit.