- ページ 9

ヒーター Ambirad Tornado 600のPDF 操作、メンテナンス、整備マニュアルをオンラインで閲覧またはダウンロードできます。Ambirad Tornado 600 15 ページ。 Mobile radiant heater

Step 7

To remove the injector with the burner head removed, unscrew

the injector from its carrier using a spanner on the hexagon

portion of its body. When replacing the injector ensure that it is

fully tightened in its carrier. Replace the sealing gasket if this is

not in good condition.

Component replacement

To replace gas safety control valve

4mm Allen keys.

Phillips screwdriver.

6" Adjustable spanner.

Follow instructions for burner maintenance steps missing out step

At step 7 do not remove the injector, but unscrew the injector

carrier and fulham hose nozzle from the gas valve. The valve can

be replaced and the injector carrier and fulham hose nozzle

re-fitted using an approved pipe joining compound on the threads

of both components.

Carry out commissioning. The governor should be fully screwed in,

i.e put out of action.

To replace the electronic sequence controller, transformer,

thermostat and pressure switch

Step 1

Access to these components is via the hinged lid. Remove the lid

securing screws.

Step 2

Components can be seen behind the hinged lid. Replace as

required ensuring connections are made in the same order as on

removal.