Ambirad ARE13 U 설치 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Ambirad ARE13 U에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad ARE13 U 20 페이지. Gas fired radiant tube heaters

페이지 인쇄

Figure 1 Correct installation of flexible gas connection

Corrugated Flexible Metallic Hose Assemblies to BS 6501 Part 11984 Class 1 Type C Construction

1 Metre Long - Ambi~Rad Part No. 6500-2

COLD POSITION

Valve

NOTE:

Elbows must be fitted to eliminate

50 ± 2 0 mm

sharp bends near end fittings.

± 5 mm

Valve

Union end

Corrugated Flexible Metallic Hose Assemblies to BS 6501 Part 11984 Class 1 Type C Construction

600 mm Long - Ambi~Rad Part No. 6500

COLD POSITION

Valve

NOTE:

Elbows must be fitted to eliminate

50 ± 2 0 mm

sharp bends near end fittings.

± 5 mm

Valve

X X

Union end

COLD POSITION

X X

COLD POSITION

HOT POSITION

*NOTE*

*NOTE* - CORRECT INSTALLATION AS SHOWN WILL ALLOW

FOR APPROX. 150 mm OF MOVEMENT DUE TO EXPANSION.

THIS INSTALLATION LAYOUT IS THE ONLY METHOD RECOMMENDED

BY THE INSTITUTE OF GAS ENGINEERS,THE MANUFACTURER AND

AMBI-RAD LTD

N.B. BURNER ILLUSTRATED IS AR SERIES, BUT INSTRUCTIONS

ARE EQUALLY APPLICABLE TO ALL OTHER RANGES OF BURNERS.

NOTE:THESE INSTRUCTIONS MUST BE CARRIED OUT IN

ACCORDANCE WITH THE RELEVANT PROVISIONS OF THE

GAS SAFETY (INSTALLATIONS AND USE) REGULATIONS 1984

(AS AMENDED) AND THE MANUFACTURERS RECOMMENDATIONS.

HOT POSITION

*NOTE*

X X

*NOTE* - CORRECT INSTALLATION AS SHOWN WILL ALLOW

FOR APPROX. 100 mm OF MOVEMENT DUE TO EXPANSION.

THIS INSTALLATION LAYOUT IS THE ONLY METHOD RECOMMENDED

BY THE INSTITUTE OF GAS ENGINEERS,THE MANUFACTURER AND

AMBI-RAD LTD

N.B. BURNER ILLUSTRATED IS AR SERIES, BUT INSTRUCTIONS

ARE EQUALLY APPLICABLE TO ALL OTHER RANGES OF BURNERS.

NOTE:THESE INSTRUCTIONS MUST BE CARRIED OUT IN

ACCORDANCE WITH THE RELEVANT PROVISIONS OF THE

GAS SAFETY (INSTALLATIONS AND USE) REGULATIONS 1984

(AS AMENDED) AND THE MANUFACTURERS RECOMMENDATIONS.

COLD POSITION

X X

Greater than 5 mm