ACR Electronics Tenbury T550MF 사용 설명서 - 페이지 11

{카테고리_이름} ACR Electronics Tenbury T550MF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics Tenbury T550MF 17 페이지.

페이지 인쇄

CURRENT June 2018 Tenbury T5500 install manual 1217-1.pdf

We recommend that the appliance is serviced annually by a competent

Daily Maintenance

• The grate should be cleaned regularly

and the ash pan emptied daily.

Do not empty the ashpan when hot,

please note that the glove provided is

not intended for emptying hot ashes,

never leave hot ashes inside the

property, always dispose of the hot

ashes safely outdoors.

Never allow the ash in the ashpan to

overfill allowing ash to be in contact

with the underside of the grate.

This will overheat the grate and cause

premature wear and distortion.

Periodic Maintenance

• The chimney should be swept at least

once a year together with the flue pipe

connection. Care should be taken to

ensure that there is not a build up of

CMY

soot on the baffle and in the airways of

the appliance.

• If the appliance has not been operated

for long periods, the flue should be

inspected and swept before use to

ensure there are no blockages within

the flue.

• The internal vermiculite panels of the

appliance should be checked regularly

for soundness. If any wear and tear is

found, we recommend these parts are

replaced immediately.

• Check the rope door seals are intact

and are not worn. These should be

replaced on an annual basis to ensure

the correct operation of this appliance.

• The glass can be cleaned using a soft

damp cloth and window cleaner or a

stove glass cleaner (available from

your local stockist)

Maintenance

engineer to ensure it's continued safe operation.

08/04/2019

Internal refractory panels

During the normal operation of your

ACR stove, the refractory panels will

experience heating and cooling.

Sometimes minor hairline cracks can

occur. All ACR stoves have a steel or

cast iron structure behind the panels

and therefore even if the cracks get

larger, the stove will still operate safely.

It is advisable to consider replacing the

internal panels when:

• The cracks are greater than 3mm.

• The surface of the refractory panel has

eroded more than 25% of it's original

thickness, or

• When the panel starts to crumble and

fall apart in chunks.

To prevent the issue from happening

and prolong the life of your internal

panels, the homeowner should "burn in"

the refractory panels in the new

appliance by building small kindling fires

to begin with and then gradually

working up to a larger fire. When adding

more fuel to the fire, caution should be

used to prevent excessive mechanical

damage to the panels.

ACR heat products bears no

responsibility for the loss or damage of

any kind to the internal panels during or

after installation or during the normal

operation of the appliance.

Use only replacement parts

recommended by the manufacturer.

16:33:23