Ambu 620001000US 사용 설명서 지침 - 페이지 16

{카테고리_이름} Ambu 620001000US에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambu 620001000US 17 페이지.

페이지 인쇄
Problem
Low picture quality.
Absent or reduced
suction capability or
difficulty in inserting
endotherapy
instrument through
the working channel.
Biopsy valve.
Endoscope buttons.
Suction button.
16
Possible cause
Blood, saliva etc. on the
lens (distal tip).
Working channel
blocked.
Suction is not active.
Endotherapy
instrument/introducer/
syringe inserted in
working channel port/
biopsy valve (applicable
if suction is absent
or reduced).
Cap detached
from biopsy valve.
Difficulty inserting
an endotherapy
instrument through
the working channel.
The setting of
the endoscope
buttons differs from
preferred setting.
Suction button detached
from endoscope.
Recommended action
Gently rub the distal tip against the
mucosa. If the lens cannot be cleaned
this way remove the endoscope and
wipe the lens with sterile gauze.
Clean the working channel using a
cleaning brush or flush the working
channel with sterile saline using a
syringe. Do not operate the suction
button when instilling fluids.
Ensure the suction tube is properly
connected to the endoscope and to the
suction system. Ensure suction system
is turned on.
Remove endotherapy instrument or
introducer/syringe from the working
channel port/biopsy valve. Check that
the instrument used is compatible with
the working channel's ID.
Ensure that the cap is attached
to the biopsy valve to avoid
reduction of suction capability.
Ensure compatibility of endotherapy
instrument to working channel size.
When the cap of the biopsy valve is
detached, it may be easier to insert an
endotherapy instrument into the
instrument channel port.
Set the endoscope button function as
preferred using the Instructions for use
for the displaying unit.
Remount suction button and test
the suction function according to
preparation step 5e . If that does not
work, then use new endoscope.