Acer TravelMate P614-51G-G2 수명 주기 확장 매뉴얼 - 페이지 5

{카테고리_이름} Acer TravelMate P614-51G-G2에 대한 수명 주기 확장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer TravelMate P614-51G-G2 43 페이지.

Disassembly Procedures



Safety Guidelines

This chapter contains step by step procedures on how to remove and de-install components from the

computer. Use the following safety guidelines to ensure your personal safety. Each procedure included

in this chapter assumes that you are preparing your computer for recycling and disposal. By

performing any of these procedures you acknowledge that any remaining warranty applicable to

your computer will be voided. Before you start any of the procedures in this chapter, make sure to

read the following safety guidelines and the respective instructions within the chapter.

CAUTION!



Turn off your computer and disconnect all power sources before opening the computer cover

or panels.



To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface at the same time as touching a connector on

the back of the computer.



Take off any metal objects on your arms or fingers such as bracelets, rings or watches and make

sure your hands are completely dry. Even if your unit is unplugged, there may still be some

remaining electric charge.



If a component does not come out easily, do not forcefully remove it. Instead, check that you

are removing it correctly and that no wires or other parts are in the way.



When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself.

Some cables have connectors with locking tabs; if you are disconnecting this type of cable, press

in on the locking tabs before you disconnect the cable.



Recommended Equipment

The following equipment are recommended to do the following maintenance procedures:



Wrist grounding strap and conductive mat



Flat screwdriver



Philips screwdriver



Polydrive screwdriver



Plastic tweezers



Flat plastic pry



WEEE Annex VII Component

These components are classified as requiring selective treatment.