AMC iA 480X 사용자 설명서 - 페이지 8

{카테고리_이름} AMC iA 480X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC iA 480X 12 페이지. Power amplifiers
AMC iA 480X에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

Operation

INPUT FOR DC 24V POWER SUPPLY

This connector is designed to power up amplifier when the main power is un-

available. Use only 24V power supply or batteries and take attention to polarity

during the wiring. If both, AC and DC power are connected, amplifier will use

main AC power.

AMPLIFIERS OUTPUT

Use this connector to connect amplifier to the loudspeakers.

GROUND LIFT SWITCH

To eliminate a ground loop, set ground switch to FLOAT position and otherwise

to connect a ground to amplifiers chassis.

LINK OUTPUT

Connect outgoing audio signal from stereo RCA and Phoenix connectors to

additional amplifier. Input and link connectors are connected with each other

directly.

USER MANUAL

iA480X Power amplifier

AMPLIFIERS OUTPUTBALANCED PHOENIX AND STEREO RCA INPUT

Connect audio signal to electronically balanced phoenix connector or to stereo

RCA. Please note that the iA480X needs at least 0 dBu to achieve maximum

power.

INPUT GAIN CONTROL

This control allows you to precisely adjust the input level of the signal arriving

at the rear-panel input connectors. At their fully counterclockwise position, the

signal is attenuated by -80 dB. At their fully clockwise position, the signal is no

attenuated. When 0dBu of signal arrives at the input and the input level controls

are set to their fully clockwise position (0dBu), the Amplifier delivers full power.