AMC iA120 사용자 설명서 - 페이지 3

{카테고리_이름} AMC iA120에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC iA120 10 페이지.

Security Precautions

Carefully READ instructions before use.

Amplifier can be operated on either 115 V or 230 V (50-60Hz), which can be selected by changing switch

position on the rear panel. The amplifier is factory set to 230 VAC mains voltage.

Keep this user manual nearby for any reference.

Precaution points and notices

Below-described precaution points and notices are to prevent self injury and property damage. Before

operating the amplifier, read this manual first to get known of potential safety hazard and to understand the

meaning of the precaution points and notices.

DO NOT install or mount the amplifier on unstable objects, such as on the rickety table or the slanted

surface. It may result in the amplifier to fall and cause body injury and/or property damage.

Be sure to ground to the safety ground (earth) terminal to avoid electric shock. Never ground to a gas pipe.

Use the amplifier only with appropriate voltage specified on the amplifier. Using the voltage higher than

specified may cause fire or electric shock.

DO NOT cut, twist, damage, nor modify the power supply cord. In addition, avoid using the power cord

close to heaters, and don't place heavy object, including the amplifier itself, on the power cord, for it may

cause fire or electric shock.

DO NOT expose the amplifier to rain or the environment where water or other liquids may be splashed,

doing this, it may cause fire or electric shock.

DO NOT remove nor plug in the power supply plug with wet hands, for it may cause electric shock.

Be sure to grasp the power supply plug when unplugging. DO NOT pull on the cord itself. Operating the

amplifier with damaged power supply cord may cause fire or electric shock.

Avoid installing the amplifier in humid or dusty places, the area exposed to the direct sunlight, locations

generating smoke or steam, or the spot near the heaters. It may result in fire or electric shock.

When moving the amplifier, be sure to remove its power supply cord from the wall outlet. Moving the

amplifier with the power cord connected to the outlet may cause damage to the power cord, and resulting

in fire or electric shock. When removing the power cord, be sure to grasp its plug to pull.

DO NOT Block the ventilation slots of the amplifier chassis. It will cause the temperature rising and may

result fire.