AMC XOi 설치 및 작동 지침 매뉴얼 - 페이지 11

{카테고리_이름} AMC XOi에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC XOi 16 페이지. 8 zone 8 source audio digital home system; 4 zone 4 source audio digital home system; 6 zone 8 source audio / video digital home system
AMC XOi에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

페이지 인쇄

4. Installing the XOi

The XOi is designed to be placed on a shelf or in a component rack. If you are

mounting the XOi with other components,you should remove the feet.

The audio sources are plugged into the four local source inputs on the back panel

of the XOi using stereo RCA cables, Fig.4

5. IR Outputs

The XOi system ships with four IRE1 IR Emitters for transferring IR data from the

keypad receivers (located under the volume button) to the IR receiver on each

piece of source equipment. There are two separated IR output sections on the back

panel. The 38KHz outputs are used for most audio sources. The exception to this is

cable and satellite boxes, which operate at a higher IR carrier frequency closer to

56Khz.It is important that the output being used for each source matches the source

input number. The outputs work individually with each source to allow independent

source control. Simply plug the IRE1 IR emitter into the appropriate IR output on the

back of the XOi and attach the flasher end over the IR receiver of the source

equipment, fig. 5

Source 1

Tuner 1

Fig. 5

Audio

Out