AMC DT16 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} AMC DT16에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC DT16 10 페이지. Dual tech curtain intrusion detector
페이지 인쇄
TAMPER: TAMPER ANTIOPENING LINE - 400mA 40Vdc
ALARM: ALARM CONTACT 100 mA - 40 V - 16 Ω
SUPPLY: 13.8Vcc 26mA Max
Fixed base rear slide the cable through the holes selected, secure the board in its housing interlocking and fix the cables
into the appropriate terminals. Use the scew to fix the top.
In the figure at the end of manual, you can see different types of installation, in the center of the window or on a side.
The drawings are for guidance only, so you should always test the sensor.
5. WARM UP AND OPERATION
At start up the sensor needs a warm up time, this time is about 40''.
During this time, the sensor it must not detect movimentation.
The WARM UP is represented from internal and external blink LEDs
Once you have finished this, you may perform the coverage tests.
www.amcelettronica.com
1 2 3 4 5
DT16
installation instructions v1.3