AMC MA 240 사용자 설명서 - 페이지 7
{카테고리_이름} AMC MA 240에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC MA 240 14 페이지. Mixing amplifier
AMC MA 240에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 사용자 설명서 (9 페이지), 사용자 설명서 (12 페이지)
페이지 인쇄
Operation
Front panel operation
XLR INPUTS LEVEL CONTROL
These rotary knobs are for adjusting volume level of the XLR inputs. First four
inputs can be used as balanced line level as well as microphone level inputs.
The phantom power can be activated for these inputs separately in rear panel.
The input gain selector is located in the rear panel too.
AUX INPUTS LEVEL CONTROL
These rotary knobs are for adjusting volume level of the AUX input.
TONE CONTROL
The separate tone controls provide attenuation of bass and treble response.
The flat position is obtained when the knobs are set to middle position. Turn
bass control knob (BASS) and treble tone control knob (TREBLE), respectively,
clockwise to raise tone level by approximately +10 dB; turn counterclockwise to
lower tone level by approximately -10 dB.
USER MANUAL
MA 240 Mixing ampliier
05
MASTER VOLUME
This potentiometer is designed to adjust audio level in the main output.
OUTPUT LEVEL INDICATION
This is level indicator of the master output. If the red LED indicator starts lighting
continuously the output is distorted. In this case, decrease the sound volume by
master volume control.
POWER INDICATOR
This LED indicates status of the power. The LED lights up if the ampliier is
powered.
POWER SWITCH
Use this switch to power on or of the ampliier. The LED in the front panel lights
up if the amplifier is
powered.