AMC XCD 설치 및 사용 설명서 지침 - 페이지 8
{카테고리_이름} AMC XCD에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC XCD 14 페이지.
If you by mistake put WMA disc into
XCD, the display will show MP3 and
will stay display "LOAD". You can just
remove
the WMA disc by pressing
OPEN/CLOSE button.
4. STOP
To stop the CD while playing,
press
the STOP button. Pressing the STOP
button
will
cancel
any
repeat-play
cycles and the display will show the
numbers of the tracks and total time
on the disc. For MP3 discs without
data of time of each track, the display
of total time on the disc will be "00:00"
(For
MP3
discs
you
generated
yourself
from your computer
will be
the case.)
STOP
button
will
also
clear
PROGRAM and RANDOM play.
5. CD MP31 DVD USB D-IN
CD MP3
Display
"CD" or "MP3", can
play CD & MP3 Discs.
DVD usa D-IN Display "DVD"; input
switched to MD5501 module.
The default position is on "CD MP3"
and display inside window will be "CD"
or "MP3" depending
on what type of
disc you put into the drawer. Under
"CD MP3" position, you can play CD or
MP3 discs from the disc drawer of the
XCD unit. By pressing the button the
input
will
be switched
to MD5501
module that has 3 in/out connectors
DVD DIGITAL INPUT (24/192),
USB
INPUT (Computer, Game Console) or
USB OUTPUT.
At the
same
time,
display inside window will be switched
to "DVD".
Please
note
both
USB
connectors can have IN/OUT features
that will be decided
by versions
of
MD5501
module.
Press
the button
again will switch the input to "CD MP3"
again.
6. PROGRAM
The XCD can be programmed
to play
up to 99 tracks in any desired order.
Press the PROGRAM button you can
start to program playback. The "PRG"
indicator will be turned on.
a)
Use Track or TITLE Up/ Down
buttons
(10)
togethe"r
with
TRACK/ TITLE selecting button
(8) to go to the TRACK you will
like to put into the PROGRAM.
b) Press "enter" button to put the
TRACK # into the PROGRAM.
c) The number (:##) above "enter"
button
inside
the
window
indicates number of PROGRAM
you are putting in. So, once you
press "enter" button the number
will increase 1.
d) Repeat above step "a)" and "b)"
until all TRACKS you like to put
into PROGRAM are entered.
e) Press PLAY/PAUSE
button
to
start
the
playback
following
the sequence
you entered into
the PROGRAM.
f) To
c I ear
the
PRO G RAM
memory, press STOP button.
7. REPEAT I enter
This button will be used as REPEAT
button,
unless the PROGRAM
mode
will
be activated
by pressing
the
PROGRAM button.
For operating the button under "enter"
mode, please refer to the above "6.
PROGRAM" section.
When the button
used as REPEAT
mode, this REPEAT button will allow
three different
types of endless play
modes.
Press REPEAT button once, the word
"REPEAT 1" will appear on the display
and the selected track will be repeated
endlessly
until the STOP button
is
pressed.
7