AMCI SD17060B 사용자 설명서 - 페이지 7
{카테고리_이름} AMCI SD17060B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMCI SD17060B 20 페이지. Stepper drives
페이지 인쇄
UL/CUL RECOGNIZED INSTALLATIONS
The SD17060B is an Underwriter Laboratory Inc.
"Industrial Control Equipment" under the control number 60GB. The UL file num-
ber is E231137. The SD17060B is appropriate for UL and CUL installations.
UL Required Information
If your installation is to meet UL requirements, you must be aware of the following information when using
the SD17060B.
Maximum surrounding air temperature is +50°C
The SD17060B does not incorporate internal motor overload protection.
The SD17060B does not provide motor over temperature protection.
The SD17060B does not provide overspeed protection.
The SD17060B shall be used in pollution degree 1 or 2 environments. If the SD17060B is mounted in
an enclosure, this enclosure must meet these requirements.
All wiring to the SD17060B shall be R/C (AVLV2), minimum rating of 80°C, 300V, except secondary
low-voltage circuit wiring.
Use 75°C copper conductors only.
Terminals shall be tighten to manufacturer's recommended torques
Power Connector shall be rated for a minimum 12A, 600V, in a pollution degree 2 environment
Motor Connector shall be rated for a minimum 16A, 600V, in a pollution degree 2 environment
I/O Connector shall be rated for a minimum 8A, 300V, in a pollution degree 2 environment
† The mating connectors that are supplied with the SD17060B meet these requirements. Additional mating
connectors can be ordered from AMCI under the part number AK-17060.
20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786
Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
®
listed device. It is listed as
†
†
†
7