FLO-DYNAMICS TS410LCD 빠른 시작 지침 - 페이지 3
{카테고리_이름} FLO-DYNAMICS TS410LCD에 대한 빠른 시작 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. FLO-DYNAMICS TS410LCD 3 페이지. Transmission fluid x-changer
페이지 인쇄Quick Start Instructions:
Flo-Dynamics, Inc. • 2600 Jeanwood Drive • Elkhart, IN 46514 • 800-303-5874 • www.flodynamics.com
TS410
HALTED: REVERSE HOSES
If the exchange stops and the display reads "Reverse Hoses", turn
vehicle off, switch the red and black service hoses, restart vehicle,
and press
.
HALTED: SHIFT TO NEUTRAL
If the exchange stops and the display reads "Shift to Neutral",
set the vehicle's parking brake, shift to Neutral, and press
FILTER CHANGE DUE
The machine will indicate when the canister filters need to be
replaced. Remove service panel. Use a standard filter band clamp
tool to unscrew old filters, and replace them with new filters.
Make sure new filters are on tight.
IMPORTANT: Machine must be primed after filter change.
TOTAL FILTER USE
From the Main Menu, press
Press
to display the total filter use. Press
POWER FAILURE MEMORY
If there is a power failure during a transmission fluid exchange,
the procedure can be continuted seamlessly.
Simply reconnect the battery cables, and press
The exchange will resume where it left off.
CYCLE VALVES
From the Main Menu, press
Press
to cycle the valves.
Additional Functions
twice.
to reset.
.
to proceed to the next menu.
TRANSMISSION
FLUID X-CHANGER
.
941776