ACR Heat Products NI22 설치 및 사용 설명서 - 페이지 9

{카테고리_이름} ACR Heat Products NI22에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Heat Products NI22 9 페이지.

sediments in your chimney and has a higher efficiency rate than a

conventional stove.

Wood is environmentally friendly as it consumes more Carbon Dioxide

whilst growing than it emits during the burning of it. It is one of the very

few fuels renewable within our lifetime. In fact, wood is the only fuel that

the Carbon Trust recognise as being "zero rated" in it's kg's of CO2

emitted each week into the atmosphere.

produced through burning is cancelled out by the fact that it consumes

more than this during it's growing.

TROUBLESHOOTING

PROBLEM

SMOKE ENTERING

ROOM FROM

APPLIANCE

TAR FORMATION

GLASS SOOTING UP

CAUSE OF PROBLEM

Make sure that the wood being burned is well

seasoned with a moisture content of no more

than 20%. Trying to burn "green" wood is like

trying to burn water.

Ensure you are not closing down the airslides

before the fire is established.

Ensure you have allowed the chimney to become

warm / hot during the initial lighting period.

Check for a flue blockage – consult a chimney

sweep if necessary.

If the problem persists, consult your stockist on

the suitability of your chimney.

Use of unseasoned wood

Poor chimney draught

Operating

the

temperatures

Use of unseasoned wood

Check the secondary airslide is open

In other words, the CO2

appliance

very

low