Amcor PCMB-12000E 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Amcor PCMB-12000E에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcor PCMB-12000E 20 페이지. Plasma 12000btu

AutoDrain NanoMist Technology

Installation of the Window Kit

In order for this unit to function properly, it must be vented to the outside.

Fitting the Exhaust Hose through a window is easy. Please see below.

1. Extend Exhaust Hose at least 6" and insert it into back of the unit, tightening

into place by turning it clockwise.

2. Attach Slide Bar Connector to the other end of the Hose by extending hose at

least 6". Then tighten Hose by turning the Slide Bar Connector clockwise.

3. Place Adjustable Slide Bar in the window and expand so it fits tightly.

4. Mark Slide Bar to record width of the window.

5. Apply Insulation Strips on top and bottom of Slide Bar.

6. Reposition Slide Bar Connector in the window. Expand the Slide Bar to fit tight.

Tighten the screws.

7. Lower the window.

8. Make sure Hose has no kinks.

Slide Bar has 3 sections which allows installation in windows up

to 48" in width.

Assembly

Adjustable

Slide Bar

Connector

Exhaust

Hose