Amcor PLMB mono 9KE-410 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Amcor PLMB mono 9KE-410에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcor PLMB mono 9KE-410 17 페이지. Plmb mono blocs
Amcor PLMB mono 9KE-410에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

페이지 인쇄

OPERATION

ON/OFF

Press

to switch the unit on or to switch off. A buzzer will beep, and the LCD will

display 12:00 o'clock as default.

Setting the clock

Press the -button for 3 seconds to set the clock. The 2 left digits of the 4 digits on

the LCD-display will flash. Press

the 2 right digits of the 4 digits will flash. Press

clock. Press the -button for 3 seconds again to activate the clock.

Setting the temperature

If you want to change the set temperature press the

display will indicate the set temperature.

Note: Reaching the set temperature depends on the room and outdoor climatic

conditions.

Mode

Pressing the -button to switch the operating mode between 'cooling' and 'fan

only'.

Fan speed

If you prefer a constant fan speed instead of the auto fan speed, press the -button

successively; the fan speed icon

• Fast

- for the turbo speed

• Normal - for the medium speed

• Slow

- for the slow speed

• Auto

- alternating fast and slow speed

Timer

For all of the following TIMER programming, proceed firstly with these standard

steps:

• Press the -button briefly; the 2 left digits of the 4 digits

on the LCD display are flashing.

• Press

to adjust the hour.

• Press the -button briefly again, the 2 right digits of the

4 digits are flashing.

• Press

to adjust the minutes of the clock in

intervals of 5 minutes. The timer is set. After 10 seconds the time display returns.

to adjust the hour. Press

on the LCD-display will rotate accordingly.

momentarily,

to adjust the minutes of the

-button. The 2 digit

OFF

Timer setting example