Amcrest IP2M-842 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Amcrest IP2M-842에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest IP2M-842 7 페이지.

페이지 인쇄

Step 6

Tap "Next" and enter your WiFi password on the next screen. Once you

click "Next", wait for around 2 minutes to give the camera time to connect

to your WiFi network. If the camera does not connect, we recommend

using the desktop setup method as outlined on pages 4 & 5.

Step 7

If you are logging in for the first time, you will be prompted to create a new

password. Please select a password that is at least 8 characters long, and

one that uses a combination of uppercase letters, lowercase letters, and

numbers. Note that once the password is changed here, it will take effect

immediately. If you forget your password, you can always reset your camera

by touching the green and white reset wires together for 1 minute.

Step 8

Tap the Start Live Preview button to access your live stream. You are now

connected to your camera!

Step 9

To connect your camera to additional smartphones and tablets, please

use the P2P Setup method as outlined on Page 6.

Step 10

To better understand the App's interface and features, please visit the Help

Center within the app. To access the Help Center, tap the menu icon on the

top left hand side

, tap More, tap Help, then select which screen you'd

like more information about.

For additional assistance, please contact us at

www.amcrest.com or give us a call at 1-888-212-7538.

Step-by-step video tutorials available at www.amcrest.com/videos

QUICK START GUIDE

Step 1

Connect the camera to a power supply using the included power adapter.

Step 2

Connect the camera to your router using the included ethernet cable.

(Skip this step if you have already set up the camera on WiFi using the

App Setup method on pages 2 & 3).

Step 3

Using a PC or Mac, insert the included CD and install the IP Config software.

Alternatively, you can download the IP Config software from

www.amcrest.com/support

Step 4

Open the IP Config software and hit the refresh button. The camera will

appear in the device list. Click the

browser. Ensure that you are using Internet Explorer or Safari.

Step 5

the username and password). If this is your first time logging into the camera,

you will be prompted to change your password. Please select a password

that is at least 8 characters long, and one that uses a combination of

uppercase letters, lowercase letters, and numbers.

Step 6

Download and install the Amcrest browser plugin to enable live viewing.

Local Access: Access your camera and all its features

and settings on your local network using Internet

Explorer, Firefox, or Safari on Windows or Mac.

Desktop

Access

icon to open the camera in your web