Amcrest IP3M-943 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Amcrest IP3M-943에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest IP3M-943 15 페이지.
Amcrest IP3M-943에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (15 페이지)

SETTING UP YOUR CAMERA

ETHERNET WIFI

SETUP

To ensure the security of your camera, you will be

asked to change the password for your camera's default

username (admin). Please select a password that is at

least 8 characters long and one that uses a combination

of uppercase letters, lowercase letters, and numbers.

Note that once the password is changed here it will

take effect immediately. If you forget your password,

you can always hard reset the camera using the steps

detailed in the Troubleshooting section of this guide.

Your camera is now ready to go! Unplug the camera

from Ethernet and power, then relocate the camera to

anywhere within range of the WiFi network that you

connected the camera to. Plug in the camera, then wait

1-2 minutes before tapping the "Start Live Preview"

button.

For additional assistance, please contact us at

www.amcrest.com or give us a call at 1-888-212-7538.

Step-by-step video tutorials available at

www.amcrest.com/videos

SETTING UP YOUR CAMERA

P2P SETUP

This setup method should only be used if the camera is already connected to the Internet via

WiFi or Ethernet cable. Use this setup method when you need to add the camera to additional

mobile devices.

Download and open the Amcrest View Pro app

from the App Store or Play Store.

From the home screen, tap the icon in the

top right corner to open the Device List.

Tap the "Add Device" button.