Amcrest IP4M-1025E 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Amcrest IP4M-1025E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest IP4M-1025E 7 페이지.
Amcrest IP4M-1025E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄

If this is your first time logging into the camera,

you will be prompted to change your password.

Please select a password that is at least 8

characters long, and one that uses a combination

of uppercase letters, lowercase letters, and

numbers.

Step 5

Download and install the Amcrest browser

plugin to enable live viewing. In case you ever

forget your password, you can hard reset your

camera by touching the leads of the green and

white reset wires together for 30 seconds.

Step 6

The camera is now successfully set up for live

viewing and playback! For quick and easy

remote access on your PC or Mac, please see

page 6 or page 8. To setup advanced remote

access via UPnP/DDNS or Port Forwarding,

please refer to the user manual which can be

accessed at amcrest.com/poecameramanual

Step 7

To set up the camera's desktop interface for

remote access, please refer to the user manual

which can be accessed at

amcrest.com/poecameramanual

QUICK START GUIDE

Step 1

Connect the camera to a Power Over Ethernet

(POE) jack on your router or switch using an

ethernet cable (1 cable included in the box).

Wait 30 seconds for the camera to start-up and

initialize.

Step 2

Using a web browser on your PC or Mac, visit

www.amcrest.com/cloud and register for a

free account. Once registered, click the "Add

Camera" button. Select "Amcrest", give the

camera a name, and enter the camera's S/N

(located on the side of the camera). Click "Next".

Step 3

On the settings page, you can adjust optional

preferences for your camera. Once settings

have been adjusted, click "Finish." Your camera

is now successfully set up for cloud access and

storage!

Cloud

Access