ACR STOVES Buxton II 기술 매뉴얼 - 페이지 3
{카테고리_이름} ACR STOVES Buxton II에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR STOVES Buxton II 17 페이지. Multifuel stove
페이지 인쇄Nominal heat output
Chimney draft required
Height
Width
Depth
Weight
Air Requirement
Flue Mass Gas Flow
2
CO @ 13% O
Mean Flue Gas Temperature
Efficiency
Mean CnHm @13%O2
Mean NOx @13%O2
DIN Plus Dust @13%O2
Log Length
*** Please note that Building Regulations Document J advises that additional permanent air supply is
required for appliances with an output of above 5Kw.
With modern properties additional air may be required as Document J suggests that adequate air
would be a benefit.
• If design air permeability ≥5.0m³/ (h.m²) then 550mm²/kW of appliance rated output above 5kW
Or
• If design air permeability ≤5.0m³/ (h.m²) then 550mm²/kW of appliance rated output
• If in doubt, please consult your registered installer for advice.
If installing into a room containing an extractor fan, please ensure that the relevant tests are
carried out according to Document J of the building regulations.
Removable 80mm direct air collar at 120mm from hearth level.
Buxton II Specifications
520
500
When fitted with the long legs option overall height: 786mm
5 kW - Wood
12Pa Min. Start up
596 mm
520 mm
363 mm
95 kg
N/A ***
4.4 g/s - Wood
0.09 Wood vol %
253°C - Wood
80.8% - Wood
Wood - 51Nmg/M3
Wood -94Nmg/M3
Wood -31Nmg/M3
Up To 420 mm
5 kW - Maxibrite
3.1 g/s - Maxibrite
0.11 Maxibrite vol%
245°C - Maxibrite
82% - Maxibrite
Maxibrite - 21Nmg/M3
Maxibrite - 83Nmg/M3
Maxibrite -6Nmg/M3
363
323