ACR STOVES EW3MF 기술 매뉴얼 - 페이지 2

{카테고리_이름} ACR STOVES EW3MF에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR STOVES EW3MF 17 페이지. Multifuel stove

페이지 인쇄

To ensure that you gain the most from your purchase, please take a few minutes

to read through this manual before lighting the appliance for the first time.

Since April 2002 only registered competent installers can install solid fuel appliances. Installations

carried out by non-registered installers must be inspected by local authority building control.

For more information please contact hetas at: www.hetas.co.uk or telephone: 0845 6345626

• Before installation and/or use of this

appliance please read these instructions

carefully to ensure that all requirements are

fully understood.

• This appliance must be installed by a

registered engineer, or approved by building

control, failure to do so may endanger life and

property.

• All the instructions in this manual should work

in conjuction with building regulations

document J, if there is a variation the most

stringent requirement should be adhered to.

• The installation of this appliance must comply

with current Building Regulations and local

regulations, including those referring to

national and European standards need to be

complied with when installing the appliance.

• Do not operate this appliance if it becomes

damaged.

• Improper use, maintenance or fitting parts

other than those approved by the

manufacturer could lead to the appliance

becoming damaged or unsafe which in turn

could lead to personal injury or damage to

the property and will void the warranty.

• The appliance must not be modified in

anyway unless authorised by ACR Heat

Products Ltd.

• The appliance should be inspected regularly

to ensure the airways are clean and free from

obstruction and the chimney swept at least

once a year.

Before installation, please ensure that the correct model has been supplied.

Please make a note of the serial number of your appliance in the space provided on the front cover

of this manual as this will be requested if you require technical assistance in the future.

Please also ensure that the commissioning checklist at the rear of the manual is completed in full.

IMPORTANT INFORMATION

• The external surfaces of this appliance will be

very hot to the touch when in operation and

due care will need to be taken when

operating the appliance to ensure safety. A

fire guard should be fitted if it is likely that the

elderly, infirm or children may come into

contact with the appliance.

• This appliance has been designed for

intermittent operation.

• This appliance must not be used as an

incinerator.

• Each installation is unique to the property, the

information contained in this manual may not

give exact installation requirements for your

installation.

• The installation must comply with Building

Regulations, European Standards and Local

authority bylaws.

Asbestos

This appliance contains no asbestos, if there is

the possibility of disturbing any asbestos in the

installation of this appliance then specialist

advise must be sought and appropriate

precautions taken.

Metal Parts

This appliance may contain sharp metal edges,

take care when installing or servicing this

appliance to avoid personal injury. Please use

appropriate personal protective equipment at

all times.