Amcrest AF-2MBC-36B 사용자 설명서 - 페이지 5

{카테고리_이름} Amcrest AF-2MBC-36B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest AF-2MBC-36B 9 페이지.

Note: The wall anchors should be in the same bag as the screws and a designed to secure the screws onto the

mounting surface.

3) Attach the power and desired video cabling.

4) Thread the included screws through the base of the camera and into the wall anchors on the mounting surface.

Then, using a Phillips head screwdriver, secure the screws and base of the camera to the mounting surface.

Note: To adjust the camera, you can loosen the adjustment screws near the base of the camera. Adjust the

position as desired and tighten when complete.

Connection

This camera series will have three leads at the end of the wiring harness. Their functions are as follows:

Green: TVI,CVI,AHD, and CVBS

Red: DC12V, 2.0A power input

Black (Dip switches): Please follow the diagram below for configuration settings:

Note: If the proper mode configuration is not set, you will not be able to view your camera on your DVR. Please

make sure you have the proper settings on your camera before you begin setting up or installing.

To connect your camera to your DVR, please follow the steps provided below:

Note: Make sure you have the proper mode configuration on your camera before running or connecting any

cables. Refer to the Figure 1-1 for more details on how to set mode configurations for your specific DVR.

Step 1: Connect a BNC (coaxial) cable to the video out connection of your camera.

Step 2: Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the power

connector of the camera.

Step 3: Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.

Step 4: Connect the male end of the DC power connector of the power adapter to the female end of the power

connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.

For more information on the installation process described, refer to the image below for more details.

Figure 1-1