ACR STOVES Malvern II 기술 매뉴얼 - 페이지 11

{카테고리_이름} ACR STOVES Malvern II에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR STOVES Malvern II 17 페이지. Multifuel stove

To remove the internal vermiculite baffle:

Firstly remove the front fuel retaining

bars. Remove the fuel retaining bar

bracket bolts and brackets. Remove the

grate.

Then slightly lift the baffle and ease one

of the side bricks forward by pulling the

front edge of the side brick into the

combustion chamber. Remove the

Please tick boxes when each procedure is completed

Ensure the serial number has been recorded on the front of this manual for any

future use

Ensure the door seals are in good condition and that the glass is secured correctly

in the door (do not over tighten the glass as this will prohibit its expansion and

could cause the glass to crack)

Ensure that all internal components are fitted correctly (these may have shifted in

transit)

Ensure that the appliance operates correctly during the first firing

Ensure the customer is aware that fumes may be given off during the first firings

as the paint cures

Advise the customer on the safe operation of the appliance

Leave the instruction manuals, operating tool and glove for the customer's use.

Record the flue draught reading of the appliance

Commissioning Check List

second side brick in the same manner,

the vermiculite lower baffle can now be

removed by lowering the front edge and

rotating the baffle and removing through

the front door.

Lift the front edge of the upper steel

baffle and drop the back edge of the

steel baffle into the combustion

chamber, remove through door.