Amcrest AF-2MBC-VARIW 사용자 설명서 - 페이지 6

{카테고리_이름} Amcrest AF-2MBC-VARIW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest AF-2MBC-VARIW 11 페이지.

Understanding the OSD menu

Most Amcrest Analog 4-in-1 Varifocal cameras, will come equipped with a toggle switch. This toggle switch is used

to access the OSD menu as well as manually control and switch between different modes on your camera.

Attached to these devices are an instructional set highlighting the basic uses of the toggle switch:

Switching Modes

The camera can be switched between TVI, CVI, AHD, and Analog modes, depending on the device it is hooked up

to, using the toggle switch. To switch the camera to CVI mode, press and hold the menu (1) button for 5 seconds

then, while holding, move the switch upward (2). To switch to TVI mode, press and hold the menu (1) for 5 seconds

then, while holding, move the switch to the left (3). To switch to AHD or analog, press and hold the menu (1)

button for 5 seconds then, while holding, move the switch to the right (4). Most Amcrest products function in CVI

so it is recommended to keep the camera in CVI mode for best results.

OSD Menu Functions

OSD stands for On-Screen Display. To access the OSD menu for your camera, press the menu (1) button and hold

for 3 seconds. The OSD menu will appear: