Amcrest IP3M-HX2 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Amcrest IP3M-HX2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest IP3M-HX2 18 페이지.

SETTING UP YOUR CAMERA

ETHERNET WIFI

SETUP

To ensure the security of your camera, you will

be asked to change the password for your

camera's default username (admin). Please select

a password that is at least 8 characters long and

one that uses a combination of uppercase letters,

lowercase letters, and numbers. Note that once

the password is changed here it will take effect

immediately. If you forget your password, you

can always hard reset the camera using the steps

detailed in the Troubleshooting section of this

guide.

Your camera is now ready to go! Unplug the

camera from Ethernet and power, then relocate

the camera to anywhere within range of the

WiFi network that you connected the camera

to. Plug in the camera, then wait 1-2 minutes

before tapping the "Start Live Preview" button.

For additional assistance, please contact us at

www.amcrest.com or give us a call at 1-888-212-7538.

Step-by-step video tutorials available at

www.amcrest.com/videos

SETTING UP YOUR CAMERA

AUDIO SYNC WIFI

SETUP

NOTE: This setup method is currently available for Amcrest IP3M-941 and IP3M-HX2 model

cameras. Please use either WiFi Configuration Setup or Ethernet WiFi Setup if you have

another camera model. Plug in your camera and follow the steps below to get your camera

up and running. Please wait 30 seconds after plugging in the camera to allow it to initialize.

Download and open the Amcrest

View Pro app from the App Store

or Play Store.

From the home screen, tap the icon in the

top right corner to open the Device List.

Tap the "Add Device" button.