Amcrest IPM-HX1 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Amcrest IPM-HX1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest IPM-HX1 18 페이지.

페이지 인쇄

1. Quick Start Guide

ADDITIONAL ACCESS METHODS

REMOTE WEB ACCESS SETUP

Using Internet Explorer, Firefox, or Safari, go to www.AmcrestView.com and register

for an account. You will be required to activate your account by e-mail (double-check

your spam folder).

Once activated, download and install the plugin for your web browser. The installation

of the plugin will require all web browsers to close.

a name, enter the S/N (found on your camera's sticker), then enter the login details for

the camera. The default username and password for the camera is admin.

Once added, the camera should appear in the device list. Click the

the camera's S/N to open the live view and playback interface.

Click the camera name in the list on the left to enable it. The camera should now be

successfully set up for live viewing and playback!

To watch a video on setting up your camera for remote web access,

please visit www.amcrest.com/remotewebsetup

I'VE LOCKED MYSELF OUT OF THE

CAMERA ACCIDENTALLY

As a security precaution, your Amcrest camera will lock out any user who tries to log in with

the wrong password after a handful of consecutive attempts. If you find that you

accidentally locked yourself out, you can wait 5 minutes to log back in or you can power

cycle the camera by unplugging and replugging the camera's power cable. If you have

forgotten your password entirely, you can hard reset the camera by finding and pushing the

reset button for 15 seconds. The reset button will either be on back of camera, on an

attached wire, or a button on the internals of the camera. Please consult your camera's user

manual for more details.

HOW DO I CHANGE MY VIDEO

STREAM RESOLUTION?

On the Amcrest View app, the live stream is set by default to Standard Resolution (not HD)

to enable quick connection. To enable HD, tap the resolution icon HD/

icon on the right. On Desktop Access the default resolution is set to HD. To change the live

stream resolution on the desktop interface, click the Main Stream (higher quality) or Sub

icon next to

Stream (lower quality) buttons near the top right hand side. On Amcrest Cloud, find your

camera in the camera list, click the pencil icon on the far right of that row, then select a

resolution from the Quality dropdown box, then click Apply. On AmcrestView.com, click the

"S" icon next to the name of the camera to change the stream to "M" (main stream).

I MOUNTED MY CAMERA UPSIDE DOWN,

HOW DO I FLIP MY CAMERA'S VIDEO STREAM?

To flip or mirror the camera's video stream, tap the flip/mirror icon in the app

also flip/mirror the camera via Desktop Access as well. Once you've logged into the

camera's Desktop Interface, click the Setup tab near the top right, click the Camera menu on

the left hand side, then click the Configuration menu item. On this screen, change the Flip

dropdown box to 180°, then change the Mirror radio button to ON. Changes should reflect

in the preview window on the Configuration screen. Once you are satisfied, click Save to

save your settings.

TROUBLESHOOTING

F R E Q U E N T LY A S K E D Q U E ST I O N S

then tap the HD

. You can