Flomec TM30N 제품 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Flomec TM30N에 대한 제품 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flomec TM30N 13 페이지. Electronic water flowmeters 3 inch & 4 inch meter sizes

GENERAL SAFETY INSTRUCTIONS

1.800.561.8187

IMPORTANT: It is your responsibility to:

•

Ensure that all equipment operators have access to adequate

instructions concerning safe operating and maintenance

procedures.

Compatibility of this product's material and the process fluid

and/or environment should be considered prior to putting into

service.

Product should never be operated outside its published

specifications for temperature or pressure. See specifications for

your model.

Make sure flow and pressure have been eliminated from process

pipe prior to installing or removing product.

Always use appropriate thread sealant or flange gaskets when

connecting product to process piping.

To protect against leakage, seal all pipe threads with an

appropriate sealing compound. Make sure the sealing compound

does not intrude into the flow path.

NOTE: If connecting to new male pipe threads, burrs and curls

can adversely affect accuracy. Correct the problem prior to turbine

installation.

NOTE: Do not over tighten the flange bolts. This may cause the gasket

to be compressed into the flow stream and may decrease the accuracy

of the meter.

Installation near high electromagnetic fields and high current

fields is not recommended and may result in inaccurate

readings.

www.

.com