Aero Hawk Field Hawk 사용 설명서 - 페이지 8

{카테고리_이름} Aero Hawk Field Hawk에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aero Hawk Field Hawk 14 페이지.

You May/will need to calibrate the compass for your region. Follow the steps below to calibrate

your Field Hawk. Calibration must be performed in an area that is at least 20 meters from Metal

ITEMS NEEDED:

• Tablet with Mission

Planner Software

• Field Hawk

• Battery

Compass Calibration

Objects and buildings. For a Video on how to calibrate your Field Hawk visit

1. Beginning by Inserting the

battery into the body of the

drone. Plug the yellow battery

connector into the yellow port

located on the drone body. If the

battery is charged you will hear a

series of beeps. (The white

connector on the battery is for

charging)

4. Notice 'Ensure Port' Click

OK to proceed.

Refer Questions to [email protected]

2. Turn on Laptop and open

Wifi Setting on the Laptop.

Connect to "ardupilot". You

won't be able to connect in

mission planner if you're

not connected to ardupilot

wifi.

5. On the top left of the screen click

Initial Setup. From the dropdown

click Mandatory Hardware, then

select Compass.

3. Open the Mission Planner

Software. Once the

software is open on the top

right of the screen you will

select from the dropdown

UDP & 115200. Then CLick

connect.

6. Select Start, follow the

instructions on Page 9 to

finish Calibrating your Field

Hawk.