AMD 740G 사용자 설명서 - 페이지 13

{카테고리_이름} AMD 740G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD 740G 14 페이지. Chipset & chipset based m/b for socket am2+ 64-bit quad core processor

3-3 Jumper Setting

(1)

Keyboard/USB function Enabled/Disabled: JP1

(2) CMOS RAM Clear (3-pin): JBAT

A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2

pins of JPAT to store the CMOS data.

To clear the CMOS, follow the procedure below:

Turn off the system and unplug the AC power

Remove ATX power cable from ATX power connector

Locate JBAT and short pins 2-3 for a few seconds

Return JBAT to its normal setting by shorting pins 1-2

Connect ATX power cable back to ATX power connector

Note: When should clear CMOS

1. Troubleshooting

2. Forget password

3. After over clocking system boot fail

JP1

1-2 Closed KB/USB Power ON Disable (Default)

Keyboard/Mouse & USB Power On Setting

JBAT

1-2 closed Normal (Default)

CMOS RAM Clear Setting

JP1

2-3 Closed KB/USB Power ON Enabled

JBAT

2-3 closed Clear CMOS