AMD 760G 사용자 설명서 - 페이지 18
{카테고리_이름} AMD 760G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD 760G 20 페이지. Based m/b for socket am2/am2+/am3 series quad core processor
AMD 760G에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)
페이지 인쇄4-1 How to Update BIOS
Step1.
Prepare a boot disc. (You may make one by click START click RUN type
SYS A: click OK)
Step2. Download upgrade tools and the latest BIOS files of the motherboard from
official website and then make a copy of it to your bootable floppy disk after
decompressing these files.
Step3. Insert the disk into A: start your computer and then type in "A:\xxxxxx.BAT"
(xxxxxxx being the file name of the latest BIOS)
Step4.
Type Enter to update and flash the BIOS. The system will restart
automatically when BIOS is upgraded.
4-2 Trouble Shooting
Problem
No power to the system to the all power light
don't illuminate, fan inside power supply
doesn't turn on.
System inoperative. Keyboard lights are on,
power indicator lights are lit, and hard drive
is spinning.
System doesn't boot from hard disk drive,
can be booted from optical drive.
System only boots from optical drive. Hard
disk can be read and applications can be
used
but
booting
impossible.
Screen
message
Configuration" or "CMOS Failure"
Can not boot system after installing second
hard drive.
JBAT
1-2 Closed Normal
Chapter 4
Useful Help
from
hard
disk
says
"Invalid
CMOS RAM Clear Setting
1. Make sure power cable is security plugged in.
2. Replace cable. 3. Contact technical support.
Using ever pressure on both ends of the DIMM,
press down firmly until the module snaps into
places.
1. Check cable running from disk to disk controller
board. .Make sure both ends are securely
plugged in, check the drive type in the standard
CMOS setup. 2. Backing up the hard drive is
extremely important. All hard disks are capable of
breaking down at any time.
1. Back up date and applications files. 2.
Reformat the hard drive. Reinstall applications
and date using backup disks.
is
Review system's equipment .Make sure correct
information on is in setup.
1. Set master /slave jumpers correctly. 2. Run
SETUP program and select correct drive types.
Call the drive manufacture for compatibility with
other drives.
15 15
JBAT
2-3 Closed Clear CMOS
Solution