Flomotion Systems LT260 운영 및 유지보수 매뉴얼 - 페이지 6

{카테고리_이름} Flomotion Systems LT260에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flomotion Systems LT260 18 페이지. Ultrasonic level transmitter

INSTALLATION

• Remove any obstacles between the sensor and measurement point.

• The bottom of the sensor should be perpendicular to the measurement point.

• Avoid mounting the sensor too close to a wall.

• Avoid setting a maximum level into the Dead Zone range.

• Avoid the exposure to direct sunlight.

• Avoid high voltage or high current lines.

• Install on solid, non-vibrating surface.

• LT260 shall be used in accordance with manufacturer's specifications.

The bottom of the sensor should be

perpendicular to the surface of water.

When mounting the sensor, keep the distance

to the tank wall into consideration.