AMD SB700 사용자 설명서 - 페이지 15

{카테고리_이름} AMD SB700에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD SB700 15 페이지. Chipset based m/b for socket am2+ 64-bit dual core amd processor

페이지 인쇄

USEFUL HELP

4-1 HOW TO UPDATE BIOS

Before updating the BIOS, users have to "Disable" the "Flash Part Write Protect" selection in

"Miscellaneous Control" of BIOS SETUP. Otherwise the system the will not allow you to upgrade

BIOS by Award Flash Utility.

STEP 1. Prepare a boot disc. (you may make one by click START click RUN type SYS A:click OK)

STEP 2. Copy utility program to your boot disc. You may copy from DRIVER CD

X:\FLASH\AWDFLASH.EXE or download from our web site.

STEP 3. Download and make a copy of the latest BIOS for AMD690X PPC motherboard series

from the web site to your boot disc.

STEP 4. Insert your boot disc into A:,

start the computer, type "Awdflash A:\ AMD690X.BIN /SN/PY/CC/R"

AMD690X xxx.BIN is the file name of latest BIOS it can be AMD690Xa.BIN or

AMD690Xb.BIN

means

STEP 5. Push ENTER to update and flash the BIOS, then the system will restart automatically.

4-2 Trouble Shooting

Problem

No power to the system to the all power light

don't illuminate, fan inside power supply doesn't

turn on.

System inoperative. Keyboard lights are on ,

power indicator lights are lit, and hard drive is

spinning.

System doesn't boot from hard disk drive, can be

booted from optical drive.

System only boots from optical drive .Hard disk

can be read and applications can be used but

booting from hard disk is impossible.

Screen message says "Invalid Configuration" or

"CMOS Failure"

Can not boot system after installing second hard

drive.

Chapter 4

don't save existing BIOS data

renew existing BIOS data

clear existing CMOS data

restart computer

Solution

1. Make sure power cable is security plugged in.

2. Replace cable. 3. Contact technical support.

Using ever pressure on both ends of the DIMM ,

press down firmly until the module snaps into

places.

1. Check cable running from disk to disk

controller board. .Make sure both ends are

securely plugged in, check the drive type in the

standard CMOS setup. 2. Backing up the hard

drive is extremely important .All hard disks are

capable of breaking down at any time.

1. Back up date and applications files. 2.

Reformat the hard drive. Reinstall applications

and date using backup disks.

Review system 's equipment .Make sure correct

information on is in setup.

1. Set master /slave jumpers correctly. 2. Run

SETUP program and select correct drive types.

Call the drive manufacture for compatibility with

other drives.