AMD SB710 사용자 설명서 - 페이지 9

{카테고리_이름} AMD SB710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD SB710 19 페이지. Based m/b for socket am2/am2+/am3 series quad core processor
AMD SB710에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

2-2 Install Memory

This motherboard provides two 240-pin DDR III SDRAM DUAL INLINE MEMORY

MODULES (DIMM) socket for DDRIII memory expansion to maximum memory

volume of 8GB.

Valid Memory Configuration

Bank

DDR III 1

DDR III 2

Total

Recommend DIMM Module Combination

One DIMM Memory Module ----Plug in DDRIII 1.

Two DIMM Memory Modules---Plug in DDRIII 1 and DDRIII 2 for Dual channel

function.

Dual channel Limited!

1. Dual channel function only supports when 2 DIMM Modules plug in both DDRIII1

& DDRIII 2.

2. Memory modules plugged in DDRIII1 & DDRIII 2 must be of the same type,

same size, and same frequency for dual channel function.

Install memory modules to your motherboard is not difficult, you can refer to figure

below to see how to install a DDRIII 1066/DDRIII 1333 SDRAM module.

NOTE! When you install DIMM module fully into the DIMM socket the eject tab

should be locked into the DIMM module very firmly and fit into its indention on both

sides.

240-Pin DIMM

DDRIII 1066/DDRIII1333

System Memory (Max.4GB)

DDRIII1&DDRIII2: Dual Channel

PCS

Maximum Capacity

4 GB

4GB

8GB