AMD SB710 사용자 설명서 - 페이지 18

{카테고리_이름} AMD SB710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD SB710 20 페이지. Based m/b for socket am2/am2+/am3 series quad core processor
AMD SB710에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

4-1 How to Update BIOS

Step1.

Prepare a boot disc. (You may make one by click START click RUN type

SYS A:

Step2. Download upgrade tools and the latest BIOS files of the motherboard from

official website and then make a copy of it to your bootable floppy disk after

decompressing these files

Step3. Insert the disk into A: start your computer and then type in "A:\xxxxxx.BAT"

(xxxxxxx being the file name of the latest BIOS)

Step4.

Type Enter to update and flash the BIOS. The system will restart

automatically when BIOS is upgraded.

4-2 Trouble Shooting

Problem

No power to the system to the all

power light don't illuminate, fan inside

power supply doesn't turn on.

System inoperative. Keyboard lights

are on, power indicator lights are lit,

and hard drive is spinning.

System doesn't boot from hard disk

drive, can be booted from optical drive.

System

only

drive .Hard disk can be read and

applications can be used but booting

from hard disk is impossible.

Screen

message

Configuration" or "CMOS Failure"

Can not boot system after installing

second hard drive.

Chapter 4

Useful Help

click OK)

boots

from

optical

says

"Invalid

Solution

1. Make sure power cable is correctly

plugged in. 2. Replace cable. 3.

Contact technical support.

Using ever pressure on both ends of

the DIMM, press down firmly until the

module snaps into places.

1. Check cable running from disk to

disk controller board. .Make sure both

ends are securely plugged in, check

the drive type in the standard CMOS

setup. 2. Backing up the hard drive is

extremely important .All hard disks are

capable of breaking down at any time.

1. Back up date and applications files.

2. Reformat the hard drive. Reinstall

applications and date using backup

disks.

Review system's equipment. Make

sure correct information on is in setup.

1. Set master /slave jumpers correctly.

2. Run SETUP program and select

correct drive types. Call the drive

manufacture

for

other drives.

compatibility

with