AMD RCS-100 사용자 설명서 - 페이지 2
{카테고리_이름} AMD RCS-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD RCS-100 12 페이지. Multipurpose camera & scope system
페이지 인쇄
1
RCS-100 with optics lenses and accessories
Model:
Description:
Handset Module
Control Unit for imaging
Otoscope Module (OT)
Module for eardrum imaging
Dermatoscope Module (DE)
Module for skin imaging
General Module (GE)
Module for mouth and throat
imaging
Table of content
Instruction for use
RCS-100
1
2
Important information
2.3 Condensation (when the lens or the monitor is
fogged up)
3
4
5
6
7
Operation instructions
7.6 Parameter setting
8
9
2
Important information read prior to start-up
You have purchased a high quality Riester RCS-100, which
has been manufactured according to the Directive 93/42 EEC
and is subject to the strictest quality controls at all times.
Read these instructions for use carefully before putting the
unit into operation and keep them in a safe place. If you
should have any questions, we are available to answer que-
ries at all times. Our address can be found in these instruc-
tions for use. The address of our sales partner will be given
upon request. Please note that all instruments described
in these instructions for use are only to be used by suitably
trained personnel. The perfect and safe functioning of this
instrument is only guaranteed when original parts and ac-
cessories from Riester are used.
2.1 Important Symbols
Accessories
Symbol
Symbol Note
Wifi-SD, Type-c
Caution must be taken. Read user manual before use
USB cable,
mains adapter
specula
Type B indicates the device is classifi ed as a device with a
Type B applied part
----------------
The operator is advised to read the instructions of user
----------------
manual
Manufacturer serial number
Lot number
Manufacturing date
Manufacturer
CE mark
The symbol indicating li-battery recyclable
The symbol indicating separate collection for Waste Electric
and Electrical Equipment per Directive 2000/532/EC
The symbol indicating separate collection for Waste Electric
and Electrical Equipment per Directive 2002/96/EC
Temperature for transport and storage condition
°C
°F
Relative Humidity for transport and storage condition
Non-ionizing radiation
Attention: Do not look into the beam
LED light
LED LIGHT
DO NOT STARE
Do not look in the beam
INTO THE BEAM
CLASS 1 LED
Class 1 LED
Fragile.
Show transport package contents fragile, so handling
Beware the package from getting wet
Upward. It shows the correct position to transport the package
Keep away from sunlight
„Green dot" (country-specifi c)
2.2 Camera handling
Protect the camera from excessive vibration, force, or pres-
sure.
Avoid using the camera under the following conditions, which
may damage the lens, the handset and may also cause the
camera to malfunction or prevent recording:
• Dropping or hitting the camera against a hard surface.
• Exerting excessive force on the lens.
The camera is not dust or splash resistant or waterproof.
Avoid using the camera in places with excessive dust, sand or
where water can come into contact with the camera. Particu-
lar care should be given to the lens and gaps around buttons.
In extremely dusty or sandy places, or exposing the camera
to rain, or moisture, can result in damage which may not be
repairable.
2.3 Condensation
(when the lens or the monitor is fogged up)
Condensation may occur when the camera is exposed to sud-
den changes of temperature or humidity. Avoid these condi-
tions because they may soil the lens or the monitor, cause
14