AMD Lasers PICASSO LITE 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} AMD Lasers PICASSO LITE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD Lasers PICASSO LITE 8 페이지.
AMD Lasers PICASSO LITE에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

페이지 인쇄

SUGGESTED APPLICATIONS GUIDE

TIP ITEM #

TIP LENGTH

DT2006020

20mm

DT3003005

5mm

DT3006010

10mm

DT4006005

5mm

DT4006010

10mm

To operate the wireless foot control, open the

cover by applying pressure to the right side

of closed foot switch with your foot.

To close the cover, push down

sharply on arrow at front of cover

with the ball of your foot.

FIBER CORE

DIAMETER

200µm

300µm

400µm

USING WIRELESS FOOT CONTROL

DIRECTIONS FOR INITIATING THE TIP

1A : PICASSO

Select "Continuous Mode"

Preset #4 (0.5) Watts

1B: PICASSO LITE

Select "Hygiene Mode" (0.5 Watts)

Touch fiber tip on articulating paper then fire laser

for one second. Repeat several times. (See Picture Below)

Best results are obtained by initiating the tip with a

wax-based articulated paper similar to the "Bausch

Articulating Paper" supplied with the unit.

PLEASE DISCARD THE TIP AFTER EACH USE

AS THE TIPS ARE SINGLE USE ONLY.

Note that the green LED Indicator light glows to

indicate that the foot switch is operating when

you step on the pedal to fire laser.

Your wireless foot control has a corded

connection option.

To use the corded connection, remove

battery from foot pedal and connect the

supplied foot control cable (purchased

separately) to the back of the foot control,

and to the back of your laser on the

receptacle marked F.C.

(See Picture 2 in Step 1 | Set-Up section)