AME 92200 운영 지침 - 페이지 3

{카테고리_이름} AME 92200에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AME 92200 5 페이지. Otr o-ring installer tool, up to 30" rims

4. Depending on amount of travel left on the threaded center rod choose a round spacer or spacers and

slide onto the threaded center rod as seen in Figure 4.

5. Turn the handle clockwise (See Figure 5a) onto the threaded enter rod, simply turn while standing to

one side until the push feet press against the rim flange, pushing the rim flange and bead of tire pass

the "O" Ring groove easy installation of the "O" Ring (See Figure 5b).

NOTE: If the hand crack becomes hard to turn this usually means that the bead flange is slightly

uneven with the wheel, simply tap the bead flange with a hammer and continue turning the hand

crack.

6. After you have installed the "O" Ring (Figure 6a) you can also install the locking-ring (Figure 6b).

AME INTERNATIONAL

OPERATING INSTRUCTIONS

- 3 -